AMERICAN BALER 8043-10-120 Auto-Tie Horizontal BalerSpecifications: -- Main cylinder: 10″. -- Bale size: 43″ x 43″ x variable. -- Feed opening: 80″ x 41-1/2". -- Power unit: (2) 60 HP Motors. -- Total ram thrust: 235,620 Lbs. -- Pressure settings: 3,000 PSI. -- No load cycle time: 9-1/2 Sec approx. -- Oil Capacity: 400 Gal

AMERICAN BALER 5042-AT-840 Auto-Tie Horizontal BalerSpecifications: -- Feed Opening: 49-1/2" x 40-1/2" -- Bale size: 42" x 42" x Variable -- Main cylinder: 8" x 66" Stroke -- Main motor: 40 HP -- No load cycle time: 25 Sec -- Under load cycle time: 43 Sec

AMERICAN BALER - PAC 4029-8T30, ...Auto-Tie BalerSpecifications: -- Motors: Twin 30 HP (2). -- Main cylinder: 8". -- Feed opening: 40"; x 29";. -- Charge box: 29"; x 42"; x 49";. -- Normal operating pressure: 2,500 PSI. -- Charge box volume: 34-1/2 Cu/Ft. -- Compressing force: 125,664 Lbs. -- Bale size: 30"; x 43"; x Variable.Features: -- Automatic wire tier. -- Single tension cylinder.

AMERICAN BALER - PAC-4029-730R, ...Auto-Tie Baler(2) Available !Specifications: -- Motor: 30 HP. -- Main cylinder: 7". -- Feed opening: 40" L x 27-1/2" W. -- Charge box: 29"; x 42"; x 49";. -- Bale size: 30" x 43" Variable. -- Normal operating pressure: 3,000 PSI. -- Compressing force: 115,453 Lbs.Features: -- PARKER PLC controls. -- Regen hydraulics.

AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".

AMERICAN BALER - 8043H-10150F: Wide-Mouth Horizontal Auto-Tie Baler including a 30° Infeed ConveyorSpecifications: &#9679 Cylinder: 10".&#9679 Motor: 150 HP (Twin 75 HP).Equipped with:&#9679 Wire-tie system.&#9679 30° Drag link incline conveyor: 6 Ft. wide x 13" deep.NOTE: Some electrical wiring has been cut, but the machine is all intact.

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

ARJES - IMPAKTOR 250, ...Dual Shaft ShredderIncludes Caset and Paddle Shafts - New in 2020Model "Bandit" with the following features: -- Dual shafts with synchronous/asynchronous drive (80,000 ft/Lbs torque)! --Quick change cassette system: Allows simplified maintenance, replacement, or refurbishment. -- Mechanically adjustable side combs (runs open or closed). -- Weighs approx. 15 tons and can easily be transported. -- Wide profile discharge belt. -- Wireless radio remote controls all track & shredding functions. -- Automatic reversing function protects against fracture of the cutting tools. -- Length: 22’; width: 7’ - 10-1/2";; height: 9’-2";; weight: 29,763 Lbs. -- Hopper size: 98-1/2"; x 62";. -- Engine: 220 HP (164.1 kW); VOLVO "T4f". -- Shafts: 59"; 1.5 m Shaft Speed: 11 - 45 RPM -- Torque: (2) 80,000 Ft.-Lbs. -- Conveyor width: 31-1/2"; Conveyor speed: 118 IPS; 3 MPS. -- Discharge Height: 11’-5";. -- Fuel Tank: 92-Gallon. -- Hydraulic Tank: 18-Gallon. --Unlock unparalleled shredding capabilities with the 2020 Bandit ARJES Impaktor 250 Shredder, equipped with advanced features including caset and paddle shafts. This industrial powerhouse is ready to elevate your operations to new heights. This is your opportunity to own cutting-edge machinery that delivers efficiency, versatility, and reliability. --Key Features: 1. Efficient Shredding Mechanism: • The inclusion of caset and paddle shafts ensures a robust and efficient shredding process, making quick work of various materials, from wood to construction debris. 2. Versatility for Multiple Applications: • The Impaktor 250 is designed to handle diverse materials, making it ideal for applications in recycling, waste management, forestry, and more. Adapt to different challenges with ease. 3. Exceptional Mobility: • Benefit from the mobility of this shredder, allowing you to take it to different job sites effortlessly. Its compact design ensures easy maneuverability in various environments. 4. User-Friendly Controls: • Take command with the intuitive control system, allowing operators to adjust settings and monitor performance for optimal efficiency. 5. Safety at the Forefront: • Safety is paramount. The Impaktor 250 is equipped with features such as emergency stop buttons and safety interlocks to ensure a secure operating environment. 6. Output Size Control: • Customize your output with mechanisms that control the shredded material's size, giving you flexibility for specific applications.

ATLANTIC - X-5: Modular Dust Collection SystemSpecifications -- Rated @ 3,500 CFM with: 5.5" Static pressure WG. -- (16) 8" x 60" Poly twill cloth; "Quick Release" filter tubes; approx. 440 sq/ft. total cloth area; discharge to (3) plastic bags. -- Equipped with: 5 HP - 3,500 RPM Blower drive centrifugal fan assembly; anti-spark cast impeller; 13.3/4" inlet dia. -- System includes: 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant with: NFPA Regulations 664 & 654 for enclosureless Dust Collectors.Very strong draw; quiet. Includes: 60 Feet, ($ 2,000) quick clamp disconnect pipes.

---Liquidation Listing---Free Loading--- 60 HP Rotary Screw Air Compressors (2 Available) https://exfactoryauctions.com/Detail/AC-232162/event/L052024$1

ATLAS COPCO GA-30 FF Rotary Screw Air Compressor w/DryerSpecifications: -- 40 HP - Approx. 187.4 CFM at 125 PSI, single-stage oil-injected rotary screw air-end & totally self-contained. -- Standard features: -- Inlet air filtration, oil injected lubrication, long-life RDX (Roto Duty Extend) synthetic oil; direct-on-line motor starter, and drain trap. -- Equipped with: -- Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Includes: -- Built-in Refrigerated Air Dryer.

AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.

AUTOQUIP 48S25 Scissor Lift.2,500 Lbs, Electro-hydraulic, 24" x 64" standard platform and 24" x 64" base frame. -- 7" Lowered height, 48" travel to raised height of 55"; .75 HP TENV motor, 1-cylinder design. -- Complete with: Hand held push button control with 10' cord. -- Options: Max. platform size up to 48" x 96", foot pedal control, accordion skirt ask for pricing.(Standard specs)

AUTOQUIP 60S60 Scissor Lift.6,000 Lbs. Cap., electro-hydraulic operation. -- Large 48" x 120" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S100 Scissor Lift10,000 Lbs Cap., electro-hydraulic operation. -- Standard 32" x 90" smooth steel platform. Base frame 32" x 87". -- 12" Lowered height, 60" travel to raised height of 72"; internally mounted 5 HP Super Torque TENV motor, 2.8 GPM, 2-cylinder design, (36) Sec travel time up-or-down. -- Complete with: Wall mount up/down push button control with 20' cord (pre-wired), velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S60 Scissor Lift;6,000 Lbs Capacity and electro-hydraulic operation. -- 36" x 60" Smooth steel platform. Base frame is 24" x 48". -- 6.5" Lowered height, 25 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 2-cylinder design. -- Complete with: Hand held control pendant.Autoquip Series 35, Surface mounted lift.

AUTOQUIP 60S40 Scissor Lift.4,000 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S80 SCISSOR LIFT.8,000 Lbs Cap., electro-hydraulic operation. -- Standard 24" x 64" smooth steel platform. -- 7.5" Lowered height, 48" travel to raised height of 55.5"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S25 Scissor Lift.2,500 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held, push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 120" smooth steel platform top. -- 36" Travel with a 6.5" lowered height and a 42.5" raised height; (25) Sec up and down speed. Base frame 24" x 98". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;